fbpx

Having your garage door stuck at a point where it won’t close or just go halfway down can be an issue. It can pose a real safety issue, both in whether it will decide to fall unexpectedly or leaving your garage open for robbery, putting your family at serious risk. It can also cause issues with your energy costs, as more of that Houston hot air gets into the garage and closer to the interior of the home. Strong Houston storms could also blow debris into your garage, possibly damage items and vehicles in the garage. So in short, this is not an issue you want to put on the honey-do list that never gets done.

If your garage door won’t close, there are some things you can check and even possibly fix yourself in order to solve the problem. Here are some reasons your garage door won’t close.

Garage Door Safety sensors are not working correctly:

If the door goes up normally, but it doesn’t come down; there is likely some issue with the sensors. Note that the garage doors have a safety sensor on both sides, and they are usually designed with a special lighting mechanism. Make sure that the lights for both sensors are on while closing the door. If the sensors show some blinking lights, it means that it is sending the wrong signal to the opener about the alignment. In order to fix the issue, you can simply push against the metal bracket, and when the lights come back to solid, the opener should work accurately.

Sensors are misaligned:

Those who have a bad habit of keeping their garage door open even when not necessary may suffer this issue more often. It is because a variety of things like pollens, water droplets, and dust, etc. may settle on the sensor due to the wind. In this case, you may need to clean the sensor to prevent the issue.

If you have installed a heavier garage door, the unwanted vibrations may also disturb the alignment, and in this case, you may need to tighten the screws to fix it. You can also call Houston Garage Door Experts to handle the problem.

Door travel adjustment:

When the door is closed, the weather stripping on the bottom part must make perfect contact with the ground. If this is not the case, you may need to adjust the opener. Note that the opener casing hides two adjustment knobs that decide the distance between the door and the ground level. You need to adjust them so that the door touches the floor properly. But never adjust it too far; otherwise, it may cause too much strain on the opener.

Damaged binding tracks or gear:

If your garage door is making grinding sounds during operation, but the door is not moving accurately, the chances are that the opener gear is broken. You can fix it by just following the simple instructions in the manual. Another reason for improper door movement is a misalignment of the side-tracks. Chances are, one of them is slanted towards the garage door, causing hindrance to the normal operation. This issue can be adjusted with the help of a screwdriver and wrench.

If the issue you are having is not a simple DIY fix, you can get help from the Houston Garage Door Repair Experts Spectrum Overhead Door LLC. For over a dozen years, Spectrum Overhead Door LLC has been the go-to for Houston area garage door repair, giving fast, same-day garage door repair.

Call Now Button